TDS Meter
TDS Meter
Digital Conductivity Meter 304 and 307 are convenient instrument for routine measurements of conductivity of various electrolytes such as Caustic content of rinse water, Electrolytic impurities in Distilled / Demineralised water, Sulphuric Acid concentration in pickling baths, Anodizing tanks, Soil Conductivity and other applications. The instrument uses state of the art IC technology and consumes very little power. Source frequency (100 Hz or 1 KHz) gets automatically selected in the appropriate range. Type 307 also measures Total Dissolved Solid (TDS) in liquid. The unit is housed in compact, shock/rust proof & light weight injection molded cabinet.
Accurate Engineering of Consistent Performance.
TDS meters are fitted with a design that provides accurate results, and therefore,
laboratories and industries can keep the quality of water in check. These meters are fitted
with state-of-the-art sensors and digital display technology that deliver fast and precise results
to ensure that safety levels, regulatory and best process conditions are upheld.
Key Features and Advantages
Digital Display: User-friendly display with instant measurement of TDS.
High-Sensitivity Sensors: Provide accuracy in a broad water sample spectrum.
Automatic Calibration: It improves the accuracy and makes upkeep easier.
Rigid and Mobile: Small size can be used on the laboratory bench and in the field.
Easy to Use: An operationally intuitive interface needs little training to be used.
Multi-Range Measurement: It can be used in drinking water, industrial water, and research .samples.
Oppositions in Industries.
TDS meters are widely used in:
Water Treatment/Purification: Makes sure that water is safe and of the proper quality.
Pharmaceutical and Biotech Labs: Monitors the water utilised in the research and production processes.
Food and Beverage Industry: Makes sure that there is a consistent water quality in production lines.
Environmental Monitoring: Checks the quality of water in rivers and lakes, industrial effluents.
Educational Institutions: Give students practical learning on water testing and analysis.
Trustworthy Instruments to Predictable Performance.
Specification :
- Manual instrument, convenient for routine analysis
- Cond. Range : 0 µS – 20 mS with 0.1 cell, 0 µS – 200 mS with 1 cell
- Cond. Resolution : 0.01µS
- TDS Range :0 ppm – 20 ppt with 0.1 cell, 0 ppm – 200 ppt with 1 cell
- TDS Resolution : 0.01 ppm
- Temperature : 00 C – 1000 C (Auto / Manual)
- Readout : 3 digits LED
Digital Ph Meter
Model 304
Specification:
- Source Frequency – 100Hz or 1KHz automatically selected
- Conductivity Range – 0 pS to 200 mS with 1.0 cell constant (5 decadic ranges)
- TDS –
- Temperature -0° C to 100° C (Manual)
- Display – 3 digits LED
- Resolution
Conductivity
TDS
Temperature -0.1ps - Accuracy
Conductivity / TDS
Temperature – +1% of f.s. z1 digit (Conductivity ) - Cond.Celt Compensation
0.1 Cell Constant
1 Cell Constant -0.9 to 1.1 - TDS – Factor –
Cond. Tempco Range – - Temperature Range –
- Temperature Sensor –
- Power – 230 V +10% 50 Hz
- Dimensions – 235(W) X 185(D) X 85(H) mm
- Weight – 1.25 kg (Approx)
- Accessories -(1) 1 Cell Constant Cell
(2) Clamp & Stand
Model 306
Specification:
- Frequency – 100 Hz or I KHz Automatic
- Conductivity
Range-0.1 uS to 100 mS. (6 decadie rzingos)
Accuracy- ±1% of F.S. l digit
Resolution- 0.001 us - TDS
Range-
Accuracy- - Temperature
Range-0° C to 100° C (Auto l Manual)
Resolution-0.1°C
Accuracy-+0.2° C ±l digit - Cell Constant-Acceptable from 0.1 to 5.0
- Auto Temp. Compensation-0° C to 100° C with PT l00 sensor
- Manual Temp. Compensation-0° C to 60° C user selectable
- Conductivity Temp. Co-efficient-0.0% to 9.9% user selectable
- Display-7 digits, 7 segment LEDs
(3 digits for TEMP/TEMPCO
4 digits for Conductivity)
With automatic decimal point selection - TDS-factor–
- Printer Port -Epson compatible 80 Column Dot Matrix
- Power-230V AC, ±10%, 50 Hz
- Dimensions-250(W) X 205(D) X 75(H) mm
Weight-1.25 Kg (Approx) - Accessories-i) Conductivity cell, cell constant 0.1
ii)Conductivity cell, cell constant 1.0
iii)Temperature probe (PT-100 sensor)
iv)Stand & Clamp
Model 307
Specification:
- Source Frequency– 100Hz or 1KHz automatically selected
- Conductivity Range -0 pS to 20 mS with 0.1 cell constant and 0 pS to 200 mS with 1 cell (5 decadic ranges)
- TDS -0ppm to 20 ppt with 0.1 cell constant
and 0 ppm to 200 ppt with 1 cell constant in 5 decadic ranges - Temperature -0° C to 100° C (Manual)
- Display – 3 digits LED
- Resolution
Conductivity
TDS
Temperature -0.01is is lowest range with cell constant of 0.1 0.01 ppm in lowest range with cell constant of 0.11° C - Accuracy
Conductivity / TDS
Temperature – +1% of t.s. +t digi1 +1° C +1 digit - Cond.Celt Compensation – 0.09 to 0.11 0.9 to 1.1
- TDS – Factor – 0 to 1.00
- Temperature Range – 0.0 to 10.0% per °C 0 to 100° C
- Temperature Sensor – PT 100
- Power – 230 V +10% 50 Hz
- Dimensions – 210(W) X 220(D) X 105(H) mm
- Weight – 1.7 kg (Approx)
- Accessories– 1 Cetl Constant Cell
1 Cell Constant Cell
Temperature probe (Pt. 100 sensor)
Clamp & Stand
Model 308
Specification:
- Frequency – 100 Hz or I KHz Automatic
- Conductivity
Range-0.1 uS to 100 mS. (6 decadie rzingos)
Accuracy- ±1% of F.S. l digit
Resolution- 0.001 us - TDS
Range-
Accuracy- - Temperature
Range-0° C to 100° C (Auto l Manual)
Resolution-0.1°C
Accuracy-+0.2° C ±l digit - Cell Constant-Acceptable from 0.1 to 5.0
- Auto Temp. Compensation-0° C to 100° C with PT l00 sensor
- Manual Temp. Compensation-0° C to 60° C user selectable
- Conductivity Temp. Co-efficient-0.0% to 9.9% user selectable
- Display-7 digits, 7 segment LEDs
(3 digits for TEMP/TEMPCO
4 digits for Conductivity)
With automatic decimal point selection - TDS-factor–
- Printer Port -Epson compatible 80 Column Dot Matrix
- Power-230V AC, ±10%, 50 Hz
- Dimensions-250(W) X 205(D) X 75(H) mm
Weight-1.25 Kg (Approx) - Accessories-i) Conductivity cell, cell constant 0.1
ii)Conductivity cell, cell constant 1.0
iii)Temperature probe (PT-100 sensor)
iv)Stand & Clamp