Contiburette
Contiburette
The system consists of a dispensing unit which can be easily mounted directly
onto a bottle by using various adapters and a detachable microprocessor
controlled programming and operating key-pad enabling fast and uncomplicated
data entry such as volume, flow rate and flow direction.
When detached from the dispensing unit the key pad may be used as a remote
control. The standard RS232 interface (1200-4800,8,N,1) enables the remote
control of all functions via a PC. In this configuration, a PC can access the
LiquidProcessor exclusive address (daisy chain). This address is programmable for
each unit.
Digital Ph Meter
M 1D
Specification:
- Subdivision -1 μl
- Drive takes place via -motor
- Flowrate -0,02 – 2,0 ml/min
- Calibration function – yes
- Interface RS 485 – yes
- Integrated rinsing system
- Temperature range – 10 ̊ – 40 ̊C
- Power supply – 9 V DC
- Dimensions HxWxD (mm) – 175 x 112 x 60
- Part No. – 62730-00
M 10D
Specification:
- Subdivision -10 μl
- Drive takes place via -motor
- Flowrate -02 – 20 ml/min
- Calibration function – yes
- Interface RS 485 – yes
- Integrated rinsing system
- Temperature range – 10 ̊ – 40 ̊C
- Power supply – 9 V DC
- Dimensions HxWxD (mm) – 175 x 112 x 60
- Part No. -62732-00
M 100D
Specification:
- Subdivision -10 μl
- Drive takes place via -motor
- Flowrate -02 – 20 ml/min
- Calibration function – yes
- Interface RS 485 – yes
- Integrated rinsing system
- Temperature range – 10 ̊ – 40 ̊C
- Power supply – 9 V DC
- Dimensions HxWxD (mm) – 175 x 112 x 60
- Part No. -62733-00
M 20D
Specification:
- Subdivision -20 μl
- Drive takes place via -motor
- Flowrate -0,3 – 30 ml/min
- Calibration function – yes
- Interface RS 485 – yes
- Integrated rinsing system
- Temperature range – 10 ̊ – 40 ̊C
- Power supply – 9 V DC
- Dimensions HxWxD (mm) – 175 x 112 x 60
- Part No. – 62734-00
M 200R
Specification:
- Subdivision -20 μl
- Drive takes place via -motor
- Flowrate -0,3 – 30 ml/min
- Calibration function – yes
- Interface RS 485 – yes
- Integrated rinsing system
- Temperature range – 10 ̊ – 40 ̊C
- Power supply – 9 V DC
- Dimensions HxWxD (mm) – 175 x 112 x 60
- Part No. – 62735-00
M 10H
Specification:
- Subdivision -10 μl
- Drive takes place via -hand
- Flowrate ca. 12 ml/min
- Calibration function – yes
- Interface RS 485 –
- Integrated rinsing system
- Temperature range – 10 ̊ – 40 ̊C
- Power supply – 9 V DC
- Dimensions HxWxD (mm) – 175 x 112 x 60
- Part No. – 62723-00
M 20H
Specification:
- Subdivision -20 μl
- Drive takes place via -hand
- Flow rate ca. 12 ml/min
- Calibration function – yes
- Interface RS 485 –
- Integrated rinsing system
- Temperature range – 10 ̊ – 40 ̊C
- Power supply – 9 V DC
- Dimensions HxWxD (mm) – 175 x 112 x 60
- Part No. – 62724-00