Leads India

  • Chennai
Get In Touch

Class III Biological Safety Cabinet

Class III Biological Safety Cabinet

Due to working with dangerous pathogens, this is not only a task but also a duty. Class III Biological Safety Cabinets are designed with specialized features for working in environments where there is a high danger of working in environments with the worst microorganisms, including lethal viruses, toxic aerosols, and very contagious agents. In case you are seeking the Class III Biological Safety Cabinet manufacturers in Chennai, we give you the state-of-the-art protection with completely sealed, negative pressure containments to the Biosafety Level-3 andLevel-4 work..
Fully Sealed Isolation

● Only glove ports are used in working.
● Nonexistent exposure to samples or aerosols.
● Is totally insulated against the operator and the environment.

High-Security Air System & Triple Filtration

● These cabinets have a 100% exhaust HEPA/ULPA filtration system that avoids the release of toxic and infectious agents to the facility.
● The leakage is removed by negative pressure.
● Redundant safety filters allow the necessary control of contamination.

Built for Extreme Bio-Research Missions

Purpose-designed for:
● Infectious disease and virology.

● Vaccine manufacturing & live viruses.

● Bio defense labs established by governments.

● Dealing with genetically altered or unfamiliar pathogens.

The working chamber has a stable sterile environment even when the high-risk operations are continuous.

Technology that Assists the Researcher

● Quick reaction alarms and pressure gauges.

● Smooth welded walls to facilitate sterilization.

● Fumigating surfaces made of chemicals.

All models comply with the global biosafety requirements, such as bsl-3 /blsl-4 laboratory requirements. To have the highest level of protection where a single error cannot be tolerated, make the best choice in Class III Biological Safety Cabinet manufacturers in Chennai – we offer the security of research, the contamination resistance, and the uncompromising serenity of our mind.
Class III Biological Safety Cabinet - GI Powder coated
Cat No LI- SPB-BS-C3-900-GI

Specification

  • MOC  G I With Powder Coated
  • Dimension  3 X 2 X 2
  • Air balancing  0%recirculation & 100% exhaust with double HEPA filtration
  • Cleanliness  Class 100 /ISO Class 5 as per ISO 14644-1
  • Front door By 5mm clear Toughen glass –sliding Door
  • Air Volume at Initial Velocity Cabinet Negative
  • Pressure   Minimum 0.5” Negative pressure as per NSF 49
  • Front door By 5mm clear Polycarbonate Door –Air Tight Construction   with Pneumatic Lift. Single side Pass box designed to avoid cross contamination entry
  • AIR FLOW: Designed fore 0.4m/s to 0.65 m/s when measure across the entire filters Space during the rated life cycle of filters.
  • PRE- FILTER: Media : Synthetic, Non-oven Polyester fiber, Washable Type.
  • Gasket : Neoprene Retention 5 Micron
  • Efficiency : 95%
  • Pressure Drop: 6 to 8 mm
  • HEPAFILTER
  • Media : Ultra clean glass fiber paper-imported
  • Gasket : Neoprene
  • Retention : 0.3Micron
  • Efficiency : 99.97%
  • Pressure Drop: 25 mm of W.c.
  • Noise Level Below 65dB on “A” scale
  • ILLUMINATION 4 feet, 40 watts florescent tube lights
  • >800 Lux at measured at work surface level
  • Ultra violet lamp 3 feet, 30 watts
  • Work Surface
  • IS 304 grade Stainless steel with Satin finish
  • Differential Pressure (^P) – 1 No
  • 0-25mm Magnehelic Gauge for HEPA filter
  • Negative Pressure 12mm
  • Motor Blower (supply air) 1440 rpm single phase
  • Power Sockets 15 amp 2 No’s inbuilt
Class III Biological Safety Cabinet - GI Powder coated
Cat No LI- SPB-BS-C3-1200-GI

Specification

  • MOC  G I With Powder Coated
  • Dimension  4 X 2 X 2
  • Air balancing  0%recirculation & 100% exhaust with double HEPA filtration
  • Cleanliness  Class 100 /ISO Class 5 as per ISO 14644-1
  • Front door By 5mm clear Toughen glass –sliding Door
  • Air Volume at Initial Velocity Cabinet Negative
  • Pressure   Minimum 0.5” Negative pressure as per NSF 49
  • Front door By 5mm clear Polycarbonate Door –Air Tight Construction   with Pneumatic Lift. Single side Pass box designed to avoid cross contamination entry
  • AIR FLOW: Designed fore 0.4m/s to 0.65 m/s when measure across the entire filters Space during the rated life cycle of filters.
  • PRE- FILTER: Media : Synthetic, Non-oven Polyester fiber, Washable Type.
  • Gasket : Neoprene Retention 5 Micron
  • Efficiency : 95%
  • Pressure Drop: 6 to 8 mm
  • HEPAFILTER
  • Media : Ultra clean glass fiber paper-imported
  • Gasket : Neoprene
  • Retention : 0.3Micron
  • Efficiency : 99.97%
  • Pressure Drop: 25 mm of W.c.
  • Noise Level Below 65dB on “A” scale
  • ILLUMINATION 4 feet, 40 watts florescent tube lights
  • >800 Lux at measured at work surface level
  • Ultra violet lamp 3 feet, 30 watts
  • Work Surface
  • IS 304 grade Stainless steel with Satin finish
  • Differential Pressure (^P) – 1 No
  • 0-25mm Magnehelic Gauge for HEPA filter
  • Negative Pressure 12mm
  • Motor Blower (supply air) 1440 rpm single phase
  • Power Sockets 15 amp 2 No’s inbuilt
Class III Biological Safety Cabinet - GI Powder coated
Cat No LI- SPB-BS-C3-1800-GI

Specification

  • MOC  G I With Powder Coated
  • Dimension  6 X 2 X 2
  • Air balancing  0%recirculation & 100% exhaust with double HEPA filtration
  • Cleanliness  Class 100 /ISO Class 5 as per ISO 14644-1
  • Front door By 5mm clear Toughen glass –sliding Door
  • Air Volume at Initial Velocity Cabinet Negative
  • Pressure   Minimum 0.5” Negative pressure as per NSF 49
  • Front door By 5mm clear Polycarbonate Door –Air Tight Construction   with Pneumatic Lift. Single side Pass box designed to avoid cross contamination entry
  • AIR FLOW: Designed fore 0.4m/s to 0.65 m/s when measure across the entire filters Space during the rated life cycle of filters.
  • PRE- FILTER: Media : Synthetic, Non-oven Polyester fiber, Washable Type.
  • Gasket : Neoprene Retention 5 Micron
  • Efficiency : 95%
  • Pressure Drop: 6 to 8 mm
  • HEPAFILTER
  • Media : Ultra clean glass fiber paper-imported
  • Gasket : Neoprene
  • Retention : 0.3Micron
  • Efficiency : 99.97%
  • Pressure Drop: 25 mm of W.c.
  • Noise Level Below 65dB on “A” scale
  • ILLUMINATION 4 feet, 40 watts florescent tube lights
  • >800 Lux at measured at work surface level
  • Ultra violet lamp 3 feet, 30 watts
  • Work Surface
  • IS 304 grade Stainless steel with Satin finish
  • Differential Pressure (^P) – 1 No
  • 0-25mm Magnehelic Gauge for HEPA filter
  • Negative Pressure 12mm
  • Motor Blower (supply air) 1440 rpm single phase
  • Power Sockets 15 amp 2 No’s inbuilt
Class III Biological Safety Cabinet - Stainless Steel
Cat No LI- SPB-BS-C3-900-SS

Specification

  • MOC  G I With Powder Coated
  • Dimension  3 X 2 X 2
  • Air balancing  0%recirculation & 100% exhaust with double HEPA filtration
  • Cleanliness  Class 100 /ISO Class 5 as per ISO 14644-1
  • Front door By 5mm clear Toughen glass –sliding Door
  • Air Volume at Initial Velocity Cabinet Negative
  • Pressure   Minimum 0.5” Negative pressure as per NSF 49
  • Front door By 5mm clear Polycarbonate Door –Air Tight Construction   with Pneumatic Lift. Single side Pass box designed to avoid cross contamination entry
  • AIR FLOW: Designed fore 0.4m/s to 0.65 m/s when measure across the entire filters Space during the rated life cycle of filters.
  • PRE- FILTER: Media : Synthetic, Non-oven Polyester fiber, Washable Type.
  • Gasket : Neoprene Retention 5 Micron
  • Efficiency : 95%
  • Pressure Drop: 6 to 8 mm
  • HEPAFILTER
  • Media : Ultra clean glass fiber paper-imported
  • Gasket : Neoprene
  • Retention : 0.3Micron
  • Efficiency : 99.97%
  • Pressure Drop: 25 mm of W.c.
  • Noise Level Below 65dB on “A” scale
  • ILLUMINATION 4 feet, 40 watts florescent tube lights
  • >800 Lux at measured at work surface level
  • Ultra violet lamp 3 feet, 30 watts
  • Work Surface
  • IS 304 grade Stainless steel with Satin finish
  • Differential Pressure (^P) – 1 No
  • 0-25mm Magnehelic Gauge for HEPA filter
  • Negative Pressure 12mm
  • Motor Blower (supply air) 1440 rpm single phase
  • Power Sockets 15 amp 2 No’s inbuilt
Class III Biological Safety Cabinet - Stainless Steel
Cat No LI- SPB-BS-C3-1200-SS

Specification

  • MOC  G I With Powder Coated
  • Dimension  4 X 2 X 2
  • Air balancing  0%recirculation & 100% exhaust with double HEPA filtration
  • Cleanliness  Class 100 /ISO Class 5 as per ISO 14644-1
  • Front door By 5mm clear Toughen glass –sliding Door
  • Air Volume at Initial Velocity Cabinet Negative
  • Pressure   Minimum 0.5” Negative pressure as per NSF 49
  • Front door By 5mm clear Polycarbonate Door –Air Tight Construction   with Pneumatic Lift. Single side Pass box designed to avoid cross contamination entry
  • AIR FLOW: Designed fore 0.4m/s to 0.65 m/s when measure across the entire filters Space during the rated life cycle of filters.
  • PRE- FILTER: Media : Synthetic, Non-oven Polyester fiber, Washable Type.
  • Gasket : Neoprene Retention 5 Micron
  • Efficiency : 95%
  • Pressure Drop: 6 to 8 mm
  • HEPAFILTER
  • Media : Ultra clean glass fiber paper-imported
  • Gasket : Neoprene
  • Retention : 0.3Micron
  • Efficiency : 99.97%
  • Pressure Drop: 25 mm of W.c.
  • Noise Level Below 65dB on “A” scale
  • ILLUMINATION 4 feet, 40 watts florescent tube lights
  • >800 Lux at measured at work surface level
  • Ultra violet lamp 3 feet, 30 watts
  • Work Surface
  • IS 304 grade Stainless steel with Satin finish
  • Differential Pressure (^P) – 1 No
  • 0-25mm Magnehelic Gauge for HEPA filter
  • Negative Pressure 12mm
  • Motor Blower (supply air) 1440 rpm single phase
  • Power Sockets 15 amp 2 No’s inbuilt
Class III Biological Safety Cabinet - Stainless Steel
Cat No LI- SPB-BS-C3-1800-SS

Specification

  • MOC  G I With Powder Coated
  • Dimension  6 X 2 X 2
  • Air balancing  0%recirculation & 100% exhaust with double HEPA filtration
  • Cleanliness  Class 100 /ISO Class 5 as per ISO 14644-1
  • Front door By 5mm clear Toughen glass –sliding Door
  • Air Volume at Initial Velocity Cabinet Negative
  • Pressure   Minimum 0.5” Negative pressure as per NSF 49
  • Front door By 5mm clear Polycarbonate Door –Air Tight Construction   with Pneumatic Lift. Single side Pass box designed to avoid cross contamination entry
  • AIR FLOW: Designed fore 0.4m/s to 0.65 m/s when measure across the entire filters Space during the rated life cycle of filters.
  • PRE- FILTER: Media : Synthetic, Non-oven Polyester fiber, Washable Type.
  • Gasket : Neoprene Retention 5 Micron
  • Efficiency : 95%
  • Pressure Drop: 6 to 8 mm
  • HEPAFILTER
  • Media : Ultra clean glass fiber paper-imported
  • Gasket : Neoprene
  • Retention : 0.3Micron
  • Efficiency : 99.97%
  • Pressure Drop: 25 mm of W.c.
  • Noise Level Below 65dB on “A” scale
  • ILLUMINATION 4 feet, 40 watts florescent tube lights
  • >800 Lux at measured at work surface level
  • Ultra violet lamp 3 feet, 30 watts
  • Work Surface
  • IS 304 grade Stainless steel with Satin finish
  • Differential Pressure (^P) – 1 No
  • 0-25mm Magnehelic Gauge for HEPA filter
  • Negative Pressure 12mm
  • Motor Blower (supply air) 1440 rpm single phase
  • Power Sockets 15 amp 2 No’s inbuilt